Font Size:

Setting the IP Address

There are two ways to set the IP address, as described in the following sections:

• Automatically (through the dynamic host configuration protocol (DHCP))
• Manually

Setting the IP Address Automatically

To set the IP address automatically through DHCP, do the following:

1. In the SANsurfer iSCSI HBA Manager main window HBA tree, select the HBA port. Click the HBA Options tab. The HBA Options tabbed page (Network tab) displays (see Configuring the QLA4xxx HBA Port).
2. In the setting the IP Address section, select the Obtain an IP address automatically (DHCP) option button.

Setting the IP Address Manually

To set the IP address manually, perform the following steps:

1. In the SANsurfer iSCSI HBA Manager main window HBA tree, select the HBA port. Click the HBA Options tab. The HBA Options tabbed page (Network tab) displays (see Configuring the QLA4xxx HBA Port).
2. In the setting the IP address section, do the following:

1. Select the Use the following IP address option button.
2. Enter the IP address.
3. Enter the subnet mask.
4. Enter the gateway.