Configuring HBA Ports Using the General Configuration Wizard—Step 1
- To access the General Configuration Wizard, do one of the following:
- If you are starting the SANsurfer iSCSI HBA Manager GUI or if you added an HBA, a message states that an unconfigured HBA has been discovered displays and asks whether you want to start General Configuration Wizard. Click Yes.
NOTE: If you do not want this message to automatically display, select the Do not show this dialog again check box.
- From the SANsurfer iSCSI HBA Manager main window HBA tree, right-click the host (or HBA, HBA port, device, or LUN connected to the host). Do one of the following:
- On the SANsurfer iSCSI HBA Manager main window Wizards menu, select General Configuration Wizard.
- From the shortcut menu, select General Configuration Wizard.
- Press CTRL+G.
HBA Port Selection Dialog Box
NOTE: If you want to sort the existing entries in the table, click the column heading. A triangle displays in the heading, indicating an ascending sort (default). Click the triangle for a descending sort.
The dialog box provides:
- Information about the HBA port configuration process.
- Information about the HBA port:
- Select. Whether the HBA port is selected for configuration
- HBA. HBA port number and HBA model
- iSCSI Name. iSCSI name
- Serial Number. The serial number of the HBA port
- Configured. Whether the HBA port is configured
Do the following:
- From the table, select the HBA port that you want to configure. You can select only one HBA port.
NOTE: When you finish, you are prompted whether you want to configure another HBA port.
- Do one of the following:
- Click Next to proceed.
- Click Cancel to exit the General Configuration Wizard without making any changes.
- Click Help to display context-sensitive help.
Back to Beginning
